Männer 3 Lagen Dermizax Shell (Latz-) Hose

Product not available

499.00 € 499.0 EUR

499.00 CHF

Our new 3-layer Dermizax® pants are traditionally equipped with a removable bib. The pants can also be connected to our jackets on the same zipper. The pants are cut wide to provide more freedom of movement during freeriding, touring or telemarking. At the leg openings we have incorporated an edge protection made of Schöller Kevlar in the color of the pants.

  • GRÖSSE

QUANTITY

ADD TO BAG

30-day money-back guarantee
Free Shipping in U.S.
Buy now, get in 2 days

  • Loose fit for freedom of movement
  • 100 % seamsealed
  • Waterproof pockets
  • Waterproof YKK® zippers
  • Side ventilation openings
  • Easy-grip zipper pullers
  • Schöller® Keprotec inforcement at leg-opening
  • Detachable bib
  • Snowskirts inside leg openings
  • Zip-to-jacket System
  • Belt loops

To help you select the correct size of garment,we've put together our recommendation below

Size Guide Men
Size Chest in cm Waist in cm Hip in cm Inseam leg in cm Height in cm
S 91-95 78-82 95-99 82-84 170-174
M 96-100 83-87 100-104 84-86 174-178
L 101-106 88-93 105-110 86-88 178-182
XL 107-112 94-99 111-116 88-90 182-186
XXL 113-118 100-105 117-122 90-92 186-190
How to Measure
Chest contour. Measure around the widest point of the chest,keeping the tape horizontal.
Waist contour. Measure around the narrowest point of the waist, keeping the tape horizontal.
Hip contour. Keeping the feet together, measure around the widest point of the hip, keeping the tape horizontal.

How to choose the Right Size
Measures are expressed in centimetres. If the taken measures are between two sizes, choose the smallest if you prefer a tighter fitting or the largest if you prefer a baggier fitting.

FAQ Link

Our Shell products are made with a membrane. The garment can be washed at 40 degrees without spinning, with a mild detergent and no softening or rinsing agents. Do not use bleach. We recommend to use a washing product free of surfactants and detergents, fabric softeners, enzymes and perfumes. They may damage the fabric’s water-resistant quality and the colour. Special washing detergents should be available at your favourite outdoor shop and will improve the performance of your products. Ask for „washing products for garments with a membrane and water-repellent coating“. Use water repellent spray on the outside of the product after washing for optimal water-resistance if needed. Dry the garment on a low setting in the dryer, or iron it at a low temperature. Warmth helps to reactivate the DWR (durable water resistance) treatment that's embedded on the surface of your product.

Note: Water repellency DWR

Our membrane products have a water repellent surface (DWR Durable Water Repellent treatment) when they are new. DWR is a polymer and prevents the fabric from attracting moisture and dirt. When you use your product, this water repellency wears off, particularly at the seat, knees, shoulders and elbows, where the garments are exposed most. For best water repellence, we recommend to re-impregnated after each wash, or when you see parts of the products surface is getting wet.

Dermizax® 3 Layer Hardshell with Tricot backing
Waterproofness: >20000mm (JIS L 1092B-1)
Breathability/MVTR >16000mg/m2/24h (JIS 1099B-1)
Water Repellency: Initially 90% - 80% after 100 washes (JIS L 0217)

Face fabric: 100% Polyester
Membrane: 100% Polyurethane
Backer: 100% Nylon

Dermizax® is a hydrophilic and non-porous membrane, developed and engineered in Japan. Or more simply said, it is a water loving film without holes, that’s responsible for the waterproofness and the breathability of your garment. If you sweat, the humidity inside your garment gets higher. The water loving PU inside the membrane attracts the humidity and leads it to the outside. You want to be dry inside your garment, because only then you will be comfortable. The newly developed QWR impregnation makes the outer fabric even more durably water-repellent than conventional DWR impregnations.